Featuring THERMO-PAN® , a high quality, sheet metal alternative for constructing return air ducts between joists and stud cavities. Consists of corrugated insulation faced with aluminum. Significantly reduces duct noises and labor.

Thermo-Pan® Return Air Panning

THERMO-PAN® is a high quality, sheet metal alternative for constructing return air ducts between joists and stud cavities. Consists of corrugated insulation faced with aluminum. Significantly reduces duct noises and labor.

  • No shop fabrication; user friendly, no cut hands
  • No ‘oilcanning’ or duct noises to generate contractor callback
  • Air space in the corrugated medium provides positive R-value
  • Stapling as directed results in a plenum air seal tighter than sheet metal
  • Enviro-friendly; made from recycled products. Moisture treated against dampness
  • Will not sustain combustion (ASTM E84-91a: Flame Spread 35/Smoke Developed Index 25)
  • No duct noise
  • Satisfied homeowners
  • Excellent for open web trusses
  • Lightweight
  • Easy to install
  • Four (4) precision pre-cut header sizes available

Sizes

16" – 24"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Thermo-Headers Joist Headers

Standard and I-Joist

Sizes

12" – 17"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Button-Lok – Hanger Strap

  • Cuts hanger and labor costs by one half
  • Button holes easily adjust duct up or down for professional installation
  • Eliminates transfer of heat loss and noise from duct system
  • Made from gray high density polyethylene
  • Easily cut with sheet metal snips

Sizes

1" × 100'

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Snap Clamps

Thermo-Snap Clamps are a low-cost solution to all your pipe mounting jobs. Pre-mounted brackets
provide an easy one man installation job that is literally a snap!

  • Multi-use applications including copper, PVC and ABS pipes
  • UV protected
  • Maintenance free – use indoors or out
  • Eliminates vibration and noise call backs
  • Easy to re-open for an addition or custom adjustments

Sizes

1-1/2" – 2"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Thermo-Frames Return Air Grille Frames

6″ Height

Two custom sizes of precision molded frames!

STANDARD – Allows unfiltered air flow

  • Precision molded polypropylene
  • Safety edged, all sides and ends
  • Double frames can be cut for use as a single
  • Place grille over frame and screw into precision molded frame holes on finished drywall

Sizes

24" – 30"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Snap-Grilles

These sturdy precision-molded white ABS grilles are designed for use with standard 1/2″ or 5/8″ drywall.
They snap-fit perfectly into the Thermo-Frames™ – whether used as a single (14″ × 6″) or as a double
(30″ × 6″) placed side-by-side.

  • Mates perfectly with 30″ × 6″ or 14″ × 6″ Frames
  • No tools or screws required – simply snap into place
  • Just depress tabs for easy removal and cleaning
  • Save time, labor and money
  • Paint to match any decor
  • No rusting, no chipped metal to touch up
  • Pre-marked for screws if used with other brand frames

Sizes

15-7/8" × 7-7/8"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Thermo-Stat Ruff Plate

  • Provides an air-tight seal around wire for accurate temperature control
  • 6″ × 6″ size fits most all makes and models of thermostats
  • Residential and commercial application
  • For wood or metal studs
  • Provides back-up support for sub-base screws
  • Keeps wire in the middle of stud
  • Easy right or left hand stud mounting

Sizes

6" × 6"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Thermo-Levelers

Leveler Blocks

Better than bricks! Level furnaces, electric heaters, air conditioners, or any other types of home or
industrial equipment.

  • Tested crushing strength: 5,000 lbs. per block
  • Lightweight
  • Water and insect resistant
  • Made from recycled wood composite that won’t chip, crack, split, or rot
  • Raises furnace off floor for easier cleaning
  • Stops moisture and equipment rusting
  • Won’t conduct cold
Vibration Blocks
  • Perfect for residential, commercial and industrial use
  • Shim furnaces and condenser units – vibration-free!
  • Made from PURE polymer that won’t chip, crack, split, or rot
  • Softer than Leveler Blocks

Sizes

3/4" – 1-3/4"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

Thermo-Thimble Through-The-Wall Line Set Kit

ThermoThimble is innovative…
  • Stops line set snagging
  • Creates a permanent, air-tight seal through walls
  • High-density foam gaskets keep out air, insects, and other pests
  • No ugly holes to patch
ThermoThimble is easy to install …
  • Installs easily on siding or masonry walls
  • Saves labor costs
  • Unit offers custom, professional look
  • For new construction or retrofit, residential and commercial

Sizes

2-1/4" – 4-7/8"

Additional Info

For complete dimensions and descriptions, refer to H7-Thermo Manufacturing.

About ECCO

ECCO™ opened in 1960 supplying HVAC contractors in Western Canada with pre-fabricated sheet metal products. Rapid growth ensued as ECCO™ became well known as a manufacturer and provider of consistently high quality products along with great customer service and expertise. Since the company’s inception and as the economy throughout Western Canada and North America has grown, ECCO™ has continued to develop and pursue new markets and opportunities.