WG SERIES – ADJUST-A-VENT

Features:

• Dual flow: Air supply or exhaust
• Strong stainless steel grip clip, provides a snug fit
• Extra thick foam gasket, allows for tight seal on uneven surfaces
• Supplied lock and nut fine tunes air flow settings
• Extra long collar simplifies installation
• Made from high strength polymer resin
• WG401 vent is compatible with “squeeze elbow” accessory: EB4X90
• Easy to install and remove
• Very quiet during operation
• Short or Extended base

Colors: Snow White (01)

SQUEEZE ELBOW FOR WG401
Color: Black (11)

WGX SERIES – TRUE-FLOW VENT

Features:

• Dual Flow: Air supply or exhaust
• 5 sizes
• Increased air flow
• 4 Wing adjustment screw to set air flow
• Snap-on trim ring included
• Nearly “True Size” inner cavity
• WGX4S vent is compatible with Primex’s “squeeze elbow” EB4X9
• Easy to install and remove
• Secure friction fit
• Added security of mounting screws through base flange
• Trim ring snaps into place over flange to hide mounting screws

Colors: Snow White (01)

SV28 – SOFFIT INTAKE AND EXHAUST VENT

Features:

• Low profile one piece molded hood eliminates leaky joints and provides maximum water protection
• Optional screen and removable damper
• Available for intake or exhaust applications
• Snap-in adapters ensure a tight seal
• Quick and easy to install
• Made with UV protected polymer resin

Approximate Sizes:
Flange: 16-1/4″ × 18-5/8″
Hood: 10-1/4″ × 10-1/2″ × 4-3/8″

Colors: Snow White (01), Taupe (23)

ACCESSORIES (SNAP-IN DUCT ADAPTER)

SV SERIES WITH DAMPER

Features:

• Low profile one piece design is less obtrusive than traditional vents
• For use in new or retrofit applications
• No need to penetrat the roof or walls
• No leaky seams on the vent hood
• Made from UV-stabilized polymer resin

Colors: Snow White (01), Taupe (23)

SV156 SERIES – SLAB DUCT SOFFIT VENT

Features:

• Molded one piece base
• Fits ECCODUCT™
• Removable damper for intake applications
• Manufactured to replace the standard metal discharge hoods currently available
• Low profile one piece molded hood eliminates leaky joints and maximizes water protection
• Made from UL listed VO polymer
• UV stabilized
• Hoods are easily cleaned or replaced

Approximate Sizes:
Flange: 6″ × 15″
Hood: 4-7/16″ × 12-1/16″

Colors: Snow White (01), Light Grey (31)

SV6 SERIES

Features:

• Molded-in mesh screen
• Comes with 2 installation screws
• The SV6X9 may be installed with or without the access frame
• Made from UV stabilized polymer resin
• Easy to install

Colors: Snow White (01)

RDV SERIES

Features:

• Extra long collar for better hose or duct connection
• Molded-in mesh screen
• 4 available sizes
• Secure friction fit
• Made from UV stabilized polymer resin

Colors: Snow White (01)

• Impact resistant polymer resin. 4″ × 90° plastic stack hood elbow
• Compatible with several 4″ diameter Primex vents
• Designed to fit inside 2″ × 4″ walls
• Works well with WG4, WGX4S and RDV4
• Easy installation
• Quick rough-in

RVL28 Series/ WC28 WALL CAP

Features:

• Enhances aesthetics with low profile that blends in with roof
• Keep inventories low with single hood size and separate 4 to 8 inch easy snap-in adapters
• Increases installation options because it can be used on steep slope roof (<60 degrees) and even as a wall cap (WC28)
• Eliminates leaky joints and maximizes water protection with one piece, molded hood
• Ensures watertight installation with over-sized flange
• Long lasting durability with UV protected, impact resistant polymer resin
• Simple intake/exhaust conversion via removable damper

Applications:

• Through-roof exhaust of dryers, bathroom and kitchen fans, stove vents
• Intake for furnaces, fresh air make-up, attic venting

Notes and Specs:

• For dryer applications Primex recommends “No bird screen (NS)” model
• For steep roof (<60 degrees) and vertical wall applications, order WC28 model
• Free Area = 27.8 sq. in. (179.4 square cm)
• Hood Size: 10-1/4″ × 10-1/2″ × 4-3/8″
• Flange Size: 16-1/4″ × 18-5/8″
• Standard configuration of RVL28 and WC28 come with removable screen and damper
• RV28 adapters sold separately

Colors:

RVL28 – Black (25), Dark Brown (68), Light Grey (31), Dark Grey (28), WC28 – Light Grey (31), Snow White (01), Tan (45), Taupe (23)

ACCESSORIES (SNAP-IN ADAPTER)

RV20 SERIES – LOW PROFILE ROOF VENT

Features:

• Eliminates leaky joints and maximizes water protection with one piece molded hood
• Ensures watertight installation with over-sized flange
• Long lasting durability with UV protected, impact resistant polymer resin
• Compatible with 4 or 5 inch ducting with included RV45 easy snap-in adapter
• Simple intake/exhaust conversion via removable damper
• Quick and easy installation with installer-friendly packaging (i.e. vent/adapter bagged together)

Applications:

• Through-roof exhaust of dryers, bathroom and kitchen fans, stove vents
• Intake for furnaces, fresh air make-up, attic venting

Notes and Specs:

• For dryer applications Primex recommends “No bird screen (NS)” model
• Free area = 20 sq. in. (129 square cm)
• Hood Size: 6.5″ × 6.88″ × 4.88″
• Standard configuration of RV20 Kit comes with screen, damper and RV45 Adapter

Colors: Black (25), Dark Brown (68), Dark Grey (28), Light Grey (31), Tan (45)

RV28 SERIES – GOOSE NECK ROOF VENT

Features:

• Provides all-weather ventilation with 5″ of additional height for snow clearance
• Maximize inventory turns with single hood size and separate 4 to 8 inch easy snap-in adapters
• Eliminates leaky joints and maximizes water protection with one piece, molded hood
• Ensures watertight installation with over-sized flange
• Long lasting durability with UV protected, impact resistant polymer resin
• Simple intake/exhaust conversion via removable damper

Applications:

• Through-roof exhaust of dryers, bathroom and kitchen fans, stove vents
• Intake for furnaces, fresh air make-up, attic venting

Notes and Specs:

• For dryer applications Primex recommends “No bird screen (NS)” model
• Free Area = 26.5 sq. in. (171 square cm)
• Hood Size: 7.5″ × 7.25″ × 9.38″
• Standard configuration of RV28 comes with removable screen and damper
• RV28 adapters sold separately

Colors: Black (25), Dark Brown (68), Dark Grey (28), Light Grey (31), Tan (45)

WC SERIES – INTAKE AND EXHAUST VENTS

Features:

• Compatible with rain screen applications via extended base that compensates for cavity between wall and cladding
• Eliminates leaky joints and maximizes water protection with one piece molded hood and built-in drip edge
• Integrity of the “Building Envelope” is maintained via removable hood that makes cleaning or replacement simple
• Long lasting durability with UV protected, impact resistant, polymer resin
• Ensures watertight installation with over-sized flange

Applications:

• Through-wall exhaust of dryers, bathroom and kitchen fans, stove vents
• Intake for furnaces, fresh air make-up

Notes and Specs:

• For dryer applications Primex recommends “No bird screen (NS)” model
• Removable damper makes conversion of intake/exhaust simple

Colors: Snow White (01), Light Grey (31), Tan (45), Taupe (23), Dark Brown (68), Black (25), Dark Grey (28)

Features:

• UV stabilized, polymer resin
• Cut away screen option
• Removable damper
• Adaptable for intake or exhaust applications
• Built in drip edge
• Ideal for use in rain screen systems
• Will not dent or rust

3″ × 10″ Wall Cap Vent – Use with 3″ × 10″ Register Boot or Slab Duct
Colors: Snow White (01), Light Grey (31), Tan (45), Dark Brown (68), Taupe (23), Black (25)

3-1/4″ × 10″ Range Hood Vent —  Use With 3-1/4″ × 10″ Kitchen Transition Boot or Slab Duct
Colors: Snow White (01), Light Grey (31), Tan (45), Dark Brown (68), Taupe (23), Black (25)

DV4 SERIES — DRYER / EXHAUST VENT (NO SCREEN)

Features:

• Low profile one piece design
• Accommodates 4″ ducting
• No leaky seams on the vent hood
• Made from UV stabilized polymer resin

Colors: Snow White (01), Taupe (23)

WCD AND WCT SERIES – DOUBLE AND TRIPLE INTAKE AND EXHAUST VENTS

Features:

• Available with screen or full opening
• Vents can be ordered with or without screen
• Quick and easy to install
• Adaptable for intake or exhaust applications
• Wall cap vents include a drip edge on a flanged base to help guard against rain
• The hood is removable for cleaning or replacement and for line servicing without compromising the “Building Envelope”
• Assembled base
• Removable damper for intake or exhaust applications
• Made with UV protected polymer resin
• Highly resistant to mechanical impact

Colors: Black (25), Light Grey (31), Snow White (01), Tan (45), Taupe (23)

WCL SERIES – LOW PROFILE INTAKE AND EXHAUST VENT

Features:

• Attractive low profile design
• Fits 7″ or 8″ diameter ducts
• Bird Screen
• Quick and easy to install
• Adaptable for intake or exhaust applications
• Incorporated drip edge for superior rain water management
• Removable hood for line servicing without disturbing “Building Envelope”
• Molded one piece base
• Removable dampers for intake or exhaust applications
• Made with UV proteted polymer resin
• Highly resistant to mechanical impact

Colors: Snow White (01), Light Grey (31), Tan (45), Taupe (23), Black (25)

WCX ­– DOME COVER

Features:

• Molded one piece base
• Incorporated drip edge for superior rain water management
• Suitable for brick and masonry walls
• Built-in bird screen
• Removable hood for line servicing without disturbing “Building Envelope”
• Removable damper for intake applications
• Available in 5″ and 6″ models
• Easy to install
• Made with UV protected polymer resin
• Highly resistant to mechanical impact

Colors: Dark Brown (68), Light Grey (31), Snow White (01), Tan (45), Taupe (23), Dark Grey (28)

WCXF – FLAT COVER

Features:

• Molded one piece base
• Incorporated drip edge for superior rain water management
• Suitable for brick and masonry walls
• Flat screen for flush mount applications
• Built-in bird screen
• Removable screen for line servicing without disturbing “Building Envelope”
• Removable damper for intake applications
• Available in 5″ and 6″ models
• Made with UV protected polymer resin
• Highly resistant to mechanical impact
• Easy to install

Colors: Dark Brown (68), Light Grey (31), Snow White (01), Tan (45), Taupe (23)

Features:

• Reversible frame
• 6″ × 9″ access opening
• Comes with 2 installation screws
• Low profile design. Ample room to work in
• Easy installation
• Made from high strength, polymer resin

Colors: Snow White (01)

Features:

• Rainscreen compatible, double drip-edge finishing plates for electrical, plumbing and custom applications
• Excellent for door bells, HVAC pipes, electrical outlets, water pipes
• Eliminates leaky joints and maximizes water protection with one-piece mold and built-in drip edges
• Integrity of the building envelope is maintained with seamless mold
• Long lasting durability with UV-protected, impact resistant, polymer resin
• Reduces chance of injury with no sharp corners or metal edges that can cut or scrape
• Three versions – 501B (blank, custom fit)
• 501 Series meets stringent requirements of the Alberta Building code that pertains to the “trimming out” of building envelope penetrations
• Saves time without having to form drip edge in the field

Colors: Snow White (01)