Air Connectors and Duct, Aluminum Roof Drains, Stack Caps and Stacks, Birdscreen, Blast Gates, Ductcap®, The Dryerbox®, and much more.

Ductulators

The ECCO Ductulator provides a quick and efficient way to size duct work according to friction, velocity, and depth criteria.

For Round and Rectangular Duct Uses Equal-Friction Method and/or Velocity Reduction Method.

Additional Info

Product shipped individually.

The DryerBox®

Dryer Vent Hose Receptacle

  • Doubles as a gas connection receptacle
  • Meets code requirements as a clean-out

See www.dryerbox.com for more information.

Sizes

Model 425
2 × 6
Upward Exhaust

Model 350
2 × 4
Upward Exhaust

Model 4D
2 × 6
Downward Exhaust

Model 3D
2 × 4
Downward Exhaust

Model 480
2 × 6
Upward/Downward Exhaust

Ductcap®

A reusable temporary end cap for air handling systems, made from polypropylene and elastic.

Sizes

Model 0610
Fits 6" to 9"

Model 1014
Fits 10" to 14"

Model 1418
Fits 14" to 18"

Model 1824
Fits 18" to 24"

Model 2430
Fits 24" to 30"

Model 3038
Fits 30" to 38"

Blast Gates – Full Collar

This unique concept in gate design is comprised of a one piece body and a manually opened gate.

  • The one piece body construction offers consistency, reliability and insensitivity to vibration.
  • Tight tolerance between the body and the gate reduces seepage to a minimum.
  • Entirely fabricated from aluminum, the Blast Gate is impervious to humid environments.

Sizes

Model FC3 - 3"

Model FC4 - 4"

Model FC5 - 5"

Model FC6 - 6"

Model FC7 - 7"

Model FC8 - 8"

Model FC9 - 9"

Model FC10 - 10"

Model FC12 - 12"

Model FC14 - 14"

Birdscreen – Galvanized

Sold per full 100 ft. roll only.

Sizes

1/2" × 1/2" x 36"
300 sq. ft.

1/2" × 1/2" × 48"
400 sq. ft.

1/4" × 1/4" × 36"
300 sq. ft.

1/4" × 1/4" × 48"
400 sq. ft.

3/4" × 3/4" × 48"
400 sq. ft.

1" × 1" × 48"
400 sq. ft.

Butyl Gasket (Sealant Tape)

Sold in 25 ft. rolls.

Sizes

3/4" × 3/16"

Wall Thimbles – Round Pipe

Sizes

Model RWT – 3"

Model RWT – 4"

Model RWT – 5"

Model RWT – 6"

Model RWT – 7"

Model RWT – 8"

Additional Info

Product shipped individually.

Type B Oval Gas Vent and Fittings

Sizes

Model 4OV5
4" × 5 ft.
Oval Gas Vent

Model 4OV4
4" × 4 ft.
Oval Gas Vent

Model 4OV3
4" × 3 ft.
Oval Gas Vent

Model 4OV2
4" × 2 ft.
Oval Gas Vent

Model 4OV18
4" × 18"
Oval Gas Vent

Model 4OV12
4" × 12"
Oval Gas Vent

Model 4OV6
4" × 6"
Oval Gas Vent

Model 4OV12A
4" × 12"
Oval Gas Vent Adj. Length

Model 4OVSL
4" × 45°
Elbow – Standard

Model 4OVFL
4" × 45°
Elbow – Flat

Model 4OVWVT
4" Wall Vent Tee

Model 4OV-RD
4" Oval to Round Adapter

Model 4RD-OV
4" Round to Oval Adapter

Model 4OVFS
4" Firestop Spacers
2" × 4"

Model 4OVFS6
4" Firestop Spacers
2" × 6"

Model 4OVAC
4" Oval White Cap

Model 4OVF
4" Oval Flashing

Model 4OVSC
4" Oval Storm Collar

Model 5OV5
5" × 5 ft.
Oval Gas Vent

Model 5OV4
5" × 4 ft.
Oval Gas Vent

Model 5OV3
5" × 3 ft.
Oval Gas Vent

Model 5OV2
5" × 2 ft.
Oval Gas Vent

Model 5OV18
5" × 18"
Oval Gas Vent

Model 5OV12
5" × 12"
Oval Gas Vent

Model 5OV6
5" × 6"
Oval Gas Vent

Model 5OV12A
5" × 12"
Oval Gas Vent Adj. Length

Model 5OVSL
5" × 45°
Elbow – Standard

Model 5OVFL
5" × 45°
Elbow – Flat

Model 5OVT
5" Wall Vent Tee

Model 5OV-RD
5" Oval to Round Adapter

Model 5RD-OV
5" Round to Oval Adapter

Model 5OVFS6
5" Firestop Spacers
2" × 6"

Model 5OVAC
5" Oval White Cap

Model 5OVF
5" Oval Flashing

Model 5OVSC
5" Oval Storm Collar

Additional Info

Product shipped individually.

Wall Caps – with Damper

Galvanized

Sizes

Model 7393-5"
3-1/4" × 10"
5" Extension

Model 7393-10"
3-1/4" × 10"
10" Extension

Bristle Brushes

  • Disposable
  • Pure bristles
  • Natural wooden handle

Sizes

1" Bristle

1-1/2" Bristle

2" Bristle

3" Bristle

Mult-E Purpose Foil Tape

  • Seals joints in duct work and insulation
  • Conforms to any shape
  • High tack strength – durable
  • UL approved

Sizes

2" × 50 yards

3" × 50 yards

2" × 50 yards FSK

3" × 50 yards FSK

Mult-E Strap

  • Hundreds of uses
  • Easy to bend
  • Wavy edge allows easier cutting to desired lengths; also allows ease of overlapping and twisting in any configuration
  • 24 Gauge (unless otherwise stated)

Sizes

Model MS3425G
3/4" × 25 ft.
Galvanized

Model MS3450G
3/4" × 50 ft.
Galvanized

Model MS34100G
3/4" × 100 ft.
Galvanized

Model MS1225G
1/2" × 25 ft.
Galvanized

Model MS3425S
3/4" × 25 ft.
Steel

Model MS3425P
3/4" × 25 ft.
PVC Coated Steel

Model MS1225S
1/2" × 25 ft.
Steel – 22 GA

Aluminum Stack Caps

Size × A × B

Sizes

1-1/4" × 1-1/4" × 2"

1-1/2" × 1-1/2" × 2-1/2"

2" × 2" × 2-3/4"

3" × 3" × 3-3/4"

4" × 4" × 5"

Additional Info

Product shipped individually.

Aluminum Stacks

Size × A × B × C

Sizes

1-1/4" × 1-7/8" × 10" × 12"

1-1/2" × 2-3/8" × 10" × 12"

2" × 2-5/8" × 11" × 12"

3" × 3-5/8" × 12" × 12"

4" × 4-7/8" × 12" × 12"

Additional Info

Product shipped individually

Aluminum Roof Drains – Plastic Top

Size × A × B × C

Sizes

2" × 1-3/4" × 11" × 13-1/2"

3" × 2-3/4" × 11" × 13-1/2"

4" × 3-3/4" × 11" × 13-1/2"

Lay-In T-Bar Ceiling Diffusers

Model TMS-3 – Square
  • Steel, high performance three cone diffuser
Model TMR – Round
  • Steel, round diffuser with two discharge patterns
Model OMNI – Architectural Omni Diffuser
  • Steel plaque, face diffuser

Sizes

Model TMS-3
6" – 12" × 12"
Max/CFM: 314

Model TMS-3
8" – 12" × 12"
Max/CFM: 559

Model TMS-3
6" – 20" × 20"
Max/CFM: –

Model TMS-3
8" – 24" × 24"
Max/CFM: 559

Model TMS-3
10" – 24" × 24"
Max/CFM: 873

Model TMS-3
12" – 24" × 24"
Max/CFM: 1257

Model TMS-3
14" – 24" × 24"
Max/CFM: 1710

Model TMR
6"
Max/CFM: 275

Model TMR
8"
Max/CFM: 490

Model TMR
10"
Max/CFM: 763

Model TMR
12"
Max/CFM: 1100

Model TMR
14"
Max/CFM: 1490

Model OMNI
6" – 12" × 12"
Max/CFM: 274

Model OMNI
8" – 12" × 12"
Max/CFM: 489

Model OMNI
6" – 24" × 24"
Max/CFM: 274

Model OMNI
8" – 24" × 24"
Max/CFM: 489

Model OMNI
10" – 24" × 24"
Max/CFM: 763

Model OMNI
12" – 24" × 24"
Max/CFM: 1099

Model OMNI
14" – 24" × 24"
Max/CFM: 1497

Diffuser Dampers

Opposed Blade Damper
  • Steel, neck-mounted opposed blade damper. Mounts above neck

Sizes

Model AG-75 – 6"

Model AG-75 – 8"

Model AG-75 – 10"

Model AG-75 – 12"

Model AG-75 – 14"

Eggcrates

Sizes

White Aluminum Core
24" × 48"

Plastic
24" × 48" – 3/8" thick

White Aluminum 1/2" × 1/2" Core
24" × 48"

3/8" Thick Styrene Plastic
24" × 48"

Dyrer Exhaust Duct Elbows

  • 2-piece construction
  • Fastening tabs for hook and twist assembly
  • Notch for exact snaplock pipe fit
  • Secondary securing accomplished with pre-drilled screw holes

See www.dryer-ell.com for more information

Dimensions: Radius × Length

Sizes

Model LT45
45° Turn, 4" dia. – 10" × 9"

Model LT90
90° Turn, 4" dia. – 10" × 18"

Air Connectors

FOIL FLEX – NON-INSULATED – MODEL S-LD

Non-insulated air connector with a reinforced metallized film laminate jacket, permanently bonded to a corrosion resistant coated spring steel wire helix. For all pressure heating and cooling systems. An economical alternative where insulated duct is not required.

H8 - S-LD Air connectors specs for

FIBERGLASS CLOTH FLEX — NON-INSULATED — MODEL SLP-10

Non-insulated air connector with extremely strong woven fiberglass fabric with flame retardant coating, permanently bonded to a corrosion resistant coated spring steel wire helix. For all pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required, or cannot be used.

H8 - SLP-10 air connectors specs

Sizes

Model S-LD – 3"

Model S-LD – 4"

Model S-LD – 5"

Model S-LD – 6"

Model S-LD – 7"

Model S-LD – 8"

Model S-LD – 10"

Model S-LD – 12"

Model S-LD – 14"

Model SLP-10 – 2"

Model SLP-10 – 3"

Model SLP-10 – 4"

Model SLP-10 – 5"

Model SLP-10 – 6"

Model SLP-10 – 7"

Model SLP-10 – 8"

Model SLP-10 – 9"

Model SLP-10 – 10"

Model SLP-10 – 12"

Model SLP-10 – 14"

Additional Info

Sold in 25 ft lengths.

Air Duct

FIBERGLASS CLASS 1 CLOTH FLEX — NON-INSULATED — PRO SERIES — MODEL STL — FOR ALL PRESSURE SYSTEMS

Flexible air duct, extremely strong with heavy fiberglass cloth fabric permanently bonded to a corrosion resistant spring steel wire helix. For low to high pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required or cannot be used, e.g., clean room applications. Unlike connector-rated products, S-TL is not limited to length of run.

  • Easily shaped to fit oval inlets and connects to fittings fast.
  • All components of S-TL, S-LP-10 and S-LD are self-extinguishing and will not support flame.
  • Unique construction will not unravel when cut.
  • Ideal for residential dryer and bathroom applications.

H8 - STL Air duct specs table

INSULATED FLEX — MODEL M-KE

Highly efficient, thermally insulated flexible duct for use in low and medium pressure heating and cooling systems. New and improved bi-directional reinforced metallized vapour barrier will not unravel. Acoustically rated, self-extinguishing chlorinated polyethylene (CPE) core easily expands over fittings. Core is permanently bonded to a coated spring steel wire helix that supports ample blanket of fiberglass insulation, providing a double air seal.

H8 - MKE Air Duct specs table

INSULATED FLEX-VENT — MODEL KM 4.2

Strong polyester film laminated and encapsulating a heavy, corrosion resistant steel wire helix, forms the inner core and supports a thick blanket of fiberglass insulation. The outer vapor barrier is a new bi-directional reinforced metallized vapor barrier which will not unravel. The smooth air tight inner core of polyester is designed for low to medium pressure systems.

H8 - KM 4.2 Air Duct specs table

Sizes

Model STL – 4"

Model STL – 6"

Model STL – 8"

Model STL – 10"

Model STL – 12"

Model STL – 14"

Model STL – 16"

Model STL – 18"

Model STL – 20"

Model M-KE – 4"

Model M-KE – 5"

Model M-KE – 6"

Model M-KE – 7"

Model M-KE – 8"

Model M-KE – 9"

Model M-KE – 10"

Model M-KE – 12"

Model M-KE – 14"

Model M-KE – 16"

Model M-KE – 18"

Model KM 4.2 – 4"

Model KM 4.2 – 5"

Model KM 4.2 – 6"

Model KM 4.2 – 7"

Model KM 4.2 – 8"

Model KM 4.2 – 9"

Model KM 4.2 – 10"

Model KM 4.2 – 12"

Model KM 4.2 – 14"

Model KM 4.2 – 16"

Model KM 4.2 – 18"

Model KM 4.2 – 20"

Additional Info

Sold in 25 ft lengths.

Air Duct Accessory

INSULATED MYLAR SLEEVE — MODEL TSM

Energy efficient pipe insulation in either metallized or polyethylene sleeve. Thick insulation blanket with R-values of 4.2, 6.0 and 8.0. Fast and economical to install over round sheet metal duct. UL classified for pipe and equipment covering.

Made with Owens Corning™ EcoTouch® formaldehyde-free Insulation.

Made with 99% natural materials and highest recycled content. Also, it is the only fiberglass insulation listed in the USDA BioPreferred Catalog.

H8 - TSM Air Duct Accessory

Sizes

Model TSM – 7"

Model TSM – 7"

Model TSM – 7"

Additional Info

Sold in 10 ft lengths.

About ECCO

ECCO™ opened in 1960 supplying HVAC contractors in Western Canada with pre-fabricated sheet metal products. Rapid growth ensued as ECCO™ became well known as a manufacturer and provider of consistently high quality products along with great customer service and expertise. Since the company’s inception and as the economy throughout Western Canada and North America has grown, ECCO™ has continued to develop and pursue new markets and opportunities.