ECCODUCT™

The ECCODUCT™ system is a rectangular spiral seamed duct embedded in the structural concrete floors of high-rise buildings. The primary use of ECCODUCT™ is to exhaust air from bathroom fans, range hoods and clothes dryers but can also be used for fresh air intake and supply air.

ECCODUCT™ is a complete engineered system. It consists of a full range of terminations, couplers and fittings. Custom fittings can also be manufactured for specific applications.

ECCODUCT™ is presently used in a multitude of structures and is backed by the more than 45 years of design and manufacturing capabilities of ECCO Manufacturing. ECCODUCT™ offers the ultimate in reliability. Automated manufacturing equipment ensures consistent quality and ease of installation.

ECCODUCT™ is manufactured in 10 foot lengths, drastically reducing labour costs to install.

ECCODUCT™ allows extreme flexibility in design and layout, making both the designers and the fitters jobs easier.

ECCODUCT™ eliminates the costly use of dropped ceilings to conceal pipes and elbows used in traditional methods. This can allow the addition of extra floors in building plans.

ECCODUCT™ is strong, resisting deformation even under the direct impact loading of 440 lbs of aggregate.

Further ECCODUCT™ features include:

ECCO inventory levels allow for quick, complete and on time deliveries.

If you want to learn more about this exceptional product or you have an existing application you want to discuss, please send us an e-mail detailing your requirements.

You can also visit our new ECCODUCT™ website at www.eccoduct.com for more information.

 

 

 

 

TYPICAL SPECIFICATIONS FOR IN-SLAB VENTILATION DUCT

In-Slab Ventilation Duct shall be the ECCODUCT™ system as manufactured by ECCO Manufacturing.

Ducting shall be manufactured with high quality galvanized steel using a spiral wound lockseam with internal reinforcing.

All fittings incased in concrete such as inlet boots, elbows, support brackets, soffit, and wall discharge and spiral wound duct shall have labeled fittings tested to ULC standards.

Testing data shall be provided to the engineer prior to installation to ensure the above requirements are met.

In cold weather climates, ECCODUCT™ shall be externally wrapped with Reflectix® DBWEF Duct Insulation on the exterior envelope discharges and intakes. Insulation distance to comply with local codes.

Installation shall be completed as per "ECCODUCT™ Installation Procedures", as provided by ECCO Manufacturing. Non compliance may result in impeded performance for which ECCO does not assume responsibility.

Disclaimer
ECCO is providing no representations or warranties whatsoever in respect of the ECCO product described herein, whether statutory, expressed or implied by custom or industry practice or otherwise. ECCO’s only liability to the customer will be to repair or replace product which is demonstrated in a timely way to have observable manufacturing defects and in any case ECCO’s liability shall not exceed the value of the goods being sold. ECCO accepts no responsibility for installation, design or operating deficiencies or problems (including moisture leakage) associated with the product. The customer and any person responsible for installation and operation of our products should ensure that a building contractor, architect and/or engineer be consulted to ensure product is appropriate for, and installation and operation accords to, applicable building codes and prudent installation practices and are consistent with building design and construction, including building envelope.

ECCODUCT™ BROCHURE
6-panel, folded to 8 1/2" × 11" brochure. Full colour, easy-to-read and filled with everything you need to know about this popular system.

To view this document, you need Acrobat Reader.

If you are interested in receiving the printed copy of this brochure please fill out the following form. Our marketing department will contact you for billing purposes where applicable.

[FrontPage Save Results Component]

Brochure requested:

Amount needed:

Name:

Company Name:

Address:

City, Province/State, Country:

Postal/Zip Code:

Phone Number:

Fax Number:

E-mail address:

For pricing and more information, please contact either Brian Featherstone or Norm Grusnick.

 Return to Product Listing